$ ./gdb/gdbserver/gdbserver localhost:1201 ./a.out 
[pid=9525] DEBUG(linux): sigchld_handler()
sigchld_handler
[pid=9525] DEBUG(linux): sigchld_handler()
sigchld_handler
[pid=9525] DEBUG(linux): sigchld_handler()
sigchld_handler
[pid=9525] DEBUG(linux): sigchld_handler()
sigchld_handler
[pid=9525] DEBUG(linux): sigchld_handler()
sigchld_handler
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
[pid=9525] DEBUG(linux): linux_create_inferior()
args: 
[pid=9529] DEBUG(linux): linux_ptrace_fun()
[pid=9525] DEBUG(linux): linux_add_process()
[pid=9525] DEBUG(linux): add_lwp()
[pid=9525] DEBUG(linux): lwp_arch_private_info()
[pid=9525] DEBUG(linux): lwp_set_arch_private_info()
[pid=9525] DEBUG(linux): lwp_arch_private_info()
[pid=9525] DEBUG(linux): linux_supports_multi_process()
[pid=9525] DEBUG(linux): linux_wait()
[pid=9525] DEBUG(linux): linux_wait_1()
>>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
linux_wait_1: [Process 9529]
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
[pid=9525] DEBUG(linux): not_stopped_callback()
[pid=9525] DEBUG(linux): linux_wait_for_event()
[pid=9525] DEBUG(linux): linux_wait_for_event_filtered()
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
[pid=9525] DEBUG(linux): resume_stopped_resumed_lwps()
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
[pid=9525] DEBUG(linux): check_zombie_leaders()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): num_lwps()
leader_pid=9529, leader_lp!=NULL=1, num_lwps=1, zombie=0
[pid=9525] DEBUG(linux): last_thread_of_process_p()
[pid=9525] DEBUG(linux): not_stopped_callback()
sigsuspend'ing
[pid=9525] DEBUG(linux): sigchld_handler()
sigchld_handler
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
LWFE: waitpid(-1, ...) returned 9529, ERRNO-OK
LLW: waitpid 9529 received Trace/breakpoint trap (stopped)
[pid=9525] DEBUG(linux): linux_low_filter_event()
[pid=9525] DEBUG(linux): find_lwp_pid()
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
[pid=9525] DEBUG(linux): resume_stopped_resumed_lwps()
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
[pid=9525] DEBUG(linux): thread_still_has_status_pending_p()
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
[pid=9525] DEBUG(linux): thread_still_has_status_pending_p()
[pid=9525] DEBUG(linux): supports_breakpoints()
[pid=9525] DEBUG(linux): finish_step_over()
[pid=9525] DEBUG(linux): handle_tracepoints()
[pid=9525] DEBUG(linux): lwp_suspended_inc()
[pid=9525] DEBUG(linux): lwp_suspended_decr()
[pid=9525] DEBUG(linux): lwp_in_step_range()
Hit a non-gdbserver trap event.
[pid=9525] DEBUG(linux): can_software_single_step()
[pid=9525] DEBUG(linux): stop_all_lwps()
>>>> entering void stop_all_lwps(int, lwp_info*)
stop_all_lwps (stop, except=none)
[pid=9525] DEBUG(linux): send_sigstop()
[pid=9525] DEBUG(linux): wait_for_sigstop()
wait_for_sigstop: pulling events
[pid=9525] DEBUG(linux): linux_wait_for_event_filtered()
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): check_zombie_leaders()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): num_lwps()
leader_pid=9529, leader_lp!=NULL=1, num_lwps=1, zombie=0
[pid=9525] DEBUG(linux): not_stopped_callback()
LLW: exit (no unwaited-for LWP)
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
stop_all_lwps done, setting stopping_threads back to !stopping
<<<< exiting void stop_all_lwps(int, lwp_info*)
[pid=9525] DEBUG(linux): linux_stabilize_threads()
[pid=9525] DEBUG(linux): stuck_in_jump_pad_callback()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
[pid=9525] DEBUG(linux): move_out_of_jump_pad_callback()
[pid=9525] DEBUG(linux): maybe_move_out_of_jump_pad()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
Checking whether LWP 9529 needs to move out of the jump pad...no
[pid=9525] DEBUG(linux): lwp_suspended_inc()
[pid=9525] DEBUG(linux): lwp_running()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): unsuspend_all_lwps()
[pid=9525] DEBUG(linux): lwp_suspended_decr()
[pid=9525] DEBUG(linux): stuck_in_jump_pad_callback()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
linux_wait_1 ret = LWP 9529.9529, 1, 5
<<<< exiting ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
          -> (pid=9529, status->kind = TARGET_WAITKIND_STOPPED)
[pid=9525] DEBUG(linux): linux_resume()
>>>> entering void linux_resume(thread_resume*, size_t)
linux_resume:
[pid=9525] DEBUG(linux): linux_set_resume_request()
already continuing LWP 9529 at GDB's request
[pid=9525] DEBUG(linux): resume_status_pending_p()
[pid=9525] DEBUG(linux): supports_breakpoints()
[pid=9525] DEBUG(linux): need_step_over_p()
Resuming, no pending status or step over needed
[pid=9525] DEBUG(linux): linux_resume_one_thread()
linux_resume done
<<<< exiting void linux_resume(thread_resume*, size_t)
[pid=9525] DEBUG(linux): linux_wait()
[pid=9525] DEBUG(linux): linux_wait_1()
>>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
linux_wait_1: [Process 9529]
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
[pid=9525] DEBUG(linux): not_stopped_callback()
[pid=9525] DEBUG(linux): linux_wait_for_event()
[pid=9525] DEBUG(linux): linux_wait_for_event_filtered()
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
[pid=9525] DEBUG(linux): resume_stopped_resumed_lwps()
RSRL: resuming stopped-resumed LWP LWP 9529.9529 at 0: step=0
[pid=9525] DEBUG(linux): linux_resume_one_lwp()
[pid=9525] DEBUG(linux): linux_resume_one_lwp_throw()
Resuming lwp 9529 (continue, signal 0, stop not expected)
[pid=9525] DEBUG(linux): ptid_of_lwp()
[pid=9525] DEBUG(linux): lwp_is_stopped()
[pid=9525] DEBUG(linux): lwp_arch_private_info()
[pid=9525] DEBUG(linux): lwp_arch_private_info()
[pid=9525] DEBUG(linux): lwp_arch_private_info()
[pid=9525] DEBUG(linux): lwp_stop_reason()
[pid=9525] DEBUG(linux): gdb_catching_syscalls_p()
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
[pid=9525] DEBUG(linux): check_zombie_leaders()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): num_lwps()
leader_pid=9529, leader_lp!=NULL=1, num_lwps=1, zombie=0
[pid=9525] DEBUG(linux): last_thread_of_process_p()
[pid=9525] DEBUG(linux): not_stopped_callback()
sigsuspend'ing
[pid=9525] DEBUG(linux): sigchld_handler()
sigchld_handler
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
LWFE: waitpid(-1, ...) returned 9529, ERRNO-OK
LLW: waitpid 9529 received Trace/breakpoint trap (stopped)
[pid=9525] DEBUG(linux): linux_low_filter_event()
[pid=9525] DEBUG(linux): find_lwp_pid()
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
[pid=9525] DEBUG(linux): resume_stopped_resumed_lwps()
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
[pid=9525] DEBUG(linux): thread_still_has_status_pending_p()
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): lwp_resumed()
[pid=9525] DEBUG(linux): thread_still_has_status_pending_p()
[pid=9525] DEBUG(linux): supports_breakpoints()
[pid=9525] DEBUG(linux): finish_step_over()
[pid=9525] DEBUG(linux): handle_tracepoints()
[pid=9525] DEBUG(linux): lwp_suspended_inc()
[pid=9525] DEBUG(linux): lwp_suspended_decr()
[pid=9525] DEBUG(linux): lwp_in_step_range()
Hit a non-gdbserver trap event.
[pid=9525] DEBUG(linux): can_software_single_step()
[pid=9525] DEBUG(linux): stop_all_lwps()
>>>> entering void stop_all_lwps(int, lwp_info*)
stop_all_lwps (stop, except=none)
[pid=9525] DEBUG(linux): send_sigstop()
[pid=9525] DEBUG(linux): wait_for_sigstop()
wait_for_sigstop: pulling events
[pid=9525] DEBUG(linux): linux_wait_for_event_filtered()
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): check_zombie_leaders()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): num_lwps()
leader_pid=9529, leader_lp!=NULL=1, num_lwps=1, zombie=0
[pid=9525] DEBUG(linux): not_stopped_callback()
LLW: exit (no unwaited-for LWP)
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
stop_all_lwps done, setting stopping_threads back to !stopping
<<<< exiting void stop_all_lwps(int, lwp_info*)
[pid=9525] DEBUG(linux): linux_stabilize_threads()
[pid=9525] DEBUG(linux): stuck_in_jump_pad_callback()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
[pid=9525] DEBUG(linux): move_out_of_jump_pad_callback()
[pid=9525] DEBUG(linux): maybe_move_out_of_jump_pad()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
Checking whether LWP 9529 needs to move out of the jump pad...no
[pid=9525] DEBUG(linux): lwp_suspended_inc()
[pid=9525] DEBUG(linux): lwp_running()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): unsuspend_all_lwps()
[pid=9525] DEBUG(linux): lwp_suspended_decr()
[pid=9525] DEBUG(linux): stuck_in_jump_pad_callback()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
linux_wait_1 ret = LWP 9529.9529, 1, 5
<<<< exiting ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
          -> (pid=9529, status->kind = TARGET_WAITKIND_STOPPED)
[pid=9525] DEBUG(linux): linux_post_create_inferior()
[pid=9525] DEBUG(linux): linux_arch_setup()
[pid=9525] DEBUG(linux): linux_pid_exe_is_elf_64_file()
[pid=9525] DEBUG(linux): elf_64_file_p()
[pid=9525] DEBUG(linux): elf_64_header_p()
[pid=9525] DEBUG(linux): linux_low_ptrace_options()
Process ./a.out created; pid = 9529
Listening on port 1201
handling possible accept event
Remote debugging from host ::1, port 49242
[pid=9525] DEBUG(linux): linux_async()
linux_async (0), previous=0
handling possible serial event
[getpkt: discarding char '+']
getpkt ("qSupported:multiprocess+;swbreak+;hwbreak+;qRelocInsn+;fork-events+;vfork-events+;exec-events+;vContSupported+;QThreadEvents+;no-resumed+;xmlRegisters=i386");  [sending ack] 
[sent ack]
[pid=9525] DEBUG(linux): linux_supports_multi_process()
[pid=9525] DEBUG(linux): linux_supports_stopped_by_sw_breakpoint()
[pid=9525] DEBUG(linux): linux_supports_stopped_by_hw_breakpoint()
[pid=9525] DEBUG(linux): linux_supports_fork_events()
[pid=9525] DEBUG(linux): linux_supports_vfork_events()
[pid=9525] DEBUG(linux): linux_supports_exec_events()
[pid=9525] DEBUG(linux): linux_process_qsupported()
[pid=9525] DEBUG(linux): linux_pid_exe_is_elf_64_file()
[pid=9525] DEBUG(linux): elf_64_file_p()
[pid=9525] DEBUG(linux): elf_64_header_p()
[pid=9525] DEBUG(linux): linux_supports_catch_syscall()
[pid=9525] DEBUG(linux): linux_supports_multi_process()
[pid=9525] DEBUG(linux): linux_supports_fork_events()
[pid=9525] DEBUG(linux): linux_supports_vfork_events()
[pid=9525] DEBUG(linux): linux_supports_exec_events()
[pid=9525] DEBUG(linux): linux_supports_non_stop()
[pid=9525] DEBUG(linux): linux_supports_disable_randomization()
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
[pid=9525] DEBUG(linux): linux_supports_hardware_single_step()
[pid=9525] DEBUG(linux): can_hardware_single_step()
[pid=9525] DEBUG(linux): linux_supports_agent()
[pid=9525] DEBUG(linux): linux_supports_stopped_by_sw_breakpoint()
[pid=9525] DEBUG(linux): linux_supports_stopped_by_hw_breakpoint()
[pid=9525] DEBUG(linux): linux_handle_new_gdb_connection()
[pid=9525] DEBUG(linux): linux_low_ptrace_options()
putpkt ("$PacketSize=47ff;QPassSignals+;QProgramSignals+;QStartupWithShell+;QEnvironmentHexEncoded+;QEnvironmentReset+;QEnvironmentUnset+;QSetWorkingDir+;QCatchSyscalls+;qXfer:libraries-svr4:read+;augmented-libraries-svr4-read+;qXfer:auxv:read+;qXfer:spu:read+;qXfer:spu:write+;qXfer:siginfo:read+;qXfer:siginfo:write+;qXfer:features:read+;QStartNoAckMode+;qXfer:osdata:read+;multiprocess+;fork-events+;vfork-events+;exec-events+;QNonStop+;QDisableRandomization+;qXfer:threads:read+;ConditionalTracepoints+;TraceStateVariables+;TracepointSource+;DisconnectedTracing+;FastTracepoints+;StaticTracepoints+;InstallInTrace+;qXfer:statictrace:read+;qXfer:traceframe-info:read+;EnableDisableTracepoints+;QTBuffer:size+;tracenz+;ConditionalBreakpoints+;BreakpointCommands+;QAgent+;Qbtrace:bts+;Qbtrace-conf:bts:size+;Qbtrace:pt+;Qbtrace-conf:pt:size+;Qbtrace:off+;qXfer:btrace:read+;qXfer:btrace-conf:read+;swbreak+;hwbreak+;qXfer:exec-file:read+;vContSupported+;QThreadEvents+;no-resumed+#7f"); [looking for ack]
[received '+' (0x2b)]
handling possible serial event
getpkt ("vMustReplyEmpty");  [sending ack] 
[sent ack]
putpkt ("$#00"); [looking for ack]
[received '+' (0x2b)]
handling possible serial event
getpkt ("QStartNoAckMode");  [sending ack] 
[sent ack]
[noack mode enabled]
putpkt ("$OK#9a"); [noack mode]
handling possible serial event
[getpkt: discarding char '+']
getpkt ("QProgramSignals:0;1;3;4;6;7;8;9;a;b;c;d;e;f;10;11;12;13;14;15;16;17;18;19;1a;1b;1c;1d;1e;1f;20;21;22;23;24;25;26;27;28;29;2a;2b;2c;2d;2e;2f;30;31;32;33;34;35;36;37;38;39;3a;3b;3c;3d;3e;3f;40;41;42;43;44;45;46;47;48;49;4a;4b;4c;4d;4e;4f;50;51;52;53;54;55;56;57;58;59;5a;5b;5c;5d;5e;5f;60;61;62;63;64;65;66;67;68;69;6a;6b;6c;6d;6e;6f;70;71;72;73;74;75;76;77;78;79;7a;7b;7c;7d;7e;7f;80;81;82;83;84;85;86;87;88;89;8a;8b;8c;8d;8e;8f;90;91;92;93;94;95;96;97;");  [no ack sent] 
putpkt ("$OK#9a"); [noack mode]
handling possible serial event
getpkt ("Hgp0.0");  [no ack sent] 
putpkt ("$OK#9a"); [noack mode]
handling possible serial event
getpkt ("qXfer:features:read:target.xml:0,1000");  [no ack sent] 
putpkt ("$m<?xml version="1.0"?>
<!DOCTYPE target SYSTEM "gdb-target.dtd">
<target>
<architecture>i386:x86-64</architecture>
<osabi>GNU/Linux</osabi><feature name="org.gnu.gdb.i386.core">
<flags id="i386_eflags" size="4">
  <field name="CF" start="0" end="0"/>
  <field name="" start="1" end="1"/>
  <field name="PF" start="2" end="2"/>
  <field name="AF" start="4" end="4"/>
  <field name="ZF" start="6" end="6"/>
  <field name="SF" start="7" end="7"/>
  <field name="TF" start="8" end="8"/>
  <field name="IF" start="9" end="9"/>
  <field name="DF" start="10" end="10"/>
  <field name="OF" start="11" end="11"/>
  <field name="NT" start="14" end="14"/>
  <field name="RF" start="16" end="16"/>
  <field name="VM" start="17" end="17"/>
  <field name="AC" start="18" end="18"/>
  <field name="VIF" start="19" end="19"/>
  <field name="VIP" start="20" end="20"/>
  <field name="ID" start="21" end="21"/>
</flags>
<reg name="rax" bitsize="64" type="int64" regnum="0"/>
<reg name="rbx" bitsize="64" type="int64" regnum="1"/>
<reg name="rcx" bitsize="64" type="int64" regnum="2"/>
<reg name="rdx" bitsize="64" type="int64" regnum="3"/>
<reg name="rsi" bitsize="64" type="int64" regnum="4"/>
<reg name="rdi" bitsize="64" type="int64" regnum="5"/>
<reg name="rbp" bitsize="64" type="data_ptr" regnum="6"/>
<reg name="rsp" bitsize="64" type="data_ptr" regnum="7"/>
<reg name="r8" bitsize="64" type="int64" regnum="8"/>
<reg name="r9" bitsize="64" type="int64" regnum="9"/>
<reg name="r10" bitsize="64" type="int64" regnum="10"/>
<reg name="r11" bitsize="64" type="int64" regnum="11"/>
<reg name="r12" bitsize="64" type="int64" regnum="12"/>
<reg name="r13" bitsize="64" type="int64" regnum="13"/>
<reg name="r14" bitsize="64" type="int64" regnum="14"/>
<reg name="r15" bitsize="64" type="int64" regnum="15"/>
<reg name="rip" bitsize="64" type="code_ptr" regnum="16"/>
<reg name="eflags" bitsize="32" type="i386_eflags" regnum="17"/>
<reg name="cs" bitsize="32" type="int32" regnum="18"/>
<reg name="ss" bitsize="32" type="int32" regnum="19"/>
<reg name="ds" bitsize="32" type="int32" regnum="20"/>
<reg name="es" bitsize="32" type="int32" regnum="21"/>
<reg name="fs" bitsize="32" type="int32" regnum="22"/>
<reg name="gs" bitsize="32" type="int32" regnum="23"/>
<reg name="st0" bitsize="80" type="i387_ext" regnum="24"/>
<reg name="st1" bitsize="80" type="i387_ext" regnum="25"/>
<reg name="st2" bitsize="80" type="i387_ext" regnum="26"/>
<reg name="st3" bitsize="80" type="i387_ext" regnum="27"/>
<reg name="st4" bitsize="80" type="i387_ext" regnum="28"/>
<reg name="st5" bitsize="80" type="i387_ext" regnum="29"/>
<reg name="st6" bitsize="80" type="i387_ext" regnum="30"/>
<reg name="st7" bitsize="80" type="i387_ext" regnum="31"/>
<reg name="fctrl" bitsize="32" type="int" regnum="32" group="float"/>
<reg name="fstat" bitsize="32" type="int" regnum="33" group="float"/>
<reg name="ftag" bitsize="32" type="int" regnum="34" group="float"/>
<reg name="fiseg" bitsize="32" type="int" regnum="35" group="float"/>
<reg name="fioff" bitsize="32" type="int" regnum="36" group="float"/>
<reg name="foseg" bitsize="32" type="int" regnum="37" group="float"/>
<reg name="fooff" bitsize="32" type="int" regnum="38" group="float"/>
<reg name="fop" bitsize="32" type="int" regnum="39" group="float"/>
</feature>
<feature name="org.gnu.gdb.i386.sse">
<vector id="v4f" type="ieee_single" count="4"/>
<vector id="v2d" type="ieee_double" count="2"/>
<vector id="v16i8" type="int8" count="16"/>
<vector id="v8i16" type="int16" count="8"/>
<vector id="v4i32" type="int32" count="4"/>
<vector id="v2i64" type="int64" count="2"/>
<union id="vec128">
  <field name="v4_float" type="v4f"/>
  <field name="v2_double" type="v2d"/>
  <field name="v16_int8" type="v16i8"/>
  <field name="v8_int16" type="v8i16"/>
  <field name="v4_int32" type="v4i32"/>
  <field name="v2_int64" type="v2i64"/>
  <field name="uint128" type="uint128"/>
</union>
<flags id="i386_mxcsr" size="4">
  <field name="IE" start="0" end="0"/>
  <field name="DE" start="1" end="1"/>
  <field name="ZE" start="2" end="2"/>
  <field name="OE" start="3" end="3"/>
  <fi#5a"); [noack mode]
handling possible serial event
getpkt ("qXfer:features:read:target.xml:1000,1000");  [no ack sent] 
putpkt ("$leld name="UE" start="4" end="4"/>
  <field name="PE" start="5" end="5"/>
  <field name="DAZ" start="6" end="6"/>
  <field name="IM" start="7" end="7"/>
  <field name="DM" start="8" end="8"/>
  <field name="ZM" start="9" end="9"/>
  <field name="OM" start="10" end="10"/>
  <field name="UM" start="11" end="11"/>
  <field name="PM" start="12" end="12"/>
  <field name="FZ" start="15" end="15"/>
</flags>
<reg name="xmm0" bitsize="128" type="vec128" regnum="40"/>
<reg name="xmm1" bitsize="128" type="vec128" regnum="41"/>
<reg name="xmm2" bitsize="128" type="vec128" regnum="42"/>
<reg name="xmm3" bitsize="128" type="vec128" regnum="43"/>
<reg name="xmm4" bitsize="128" type="vec128" regnum="44"/>
<reg name="xmm5" bitsize="128" type="vec128" regnum="45"/>
<reg name="xmm6" bitsize="128" type="vec128" regnum="46"/>
<reg name="xmm7" bitsize="128" type="vec128" regnum="47"/>
<reg name="xmm8" bitsize="128" type="vec128" regnum="48"/>
<reg name="xmm9" bitsize="128" type="vec128" regnum="49"/>
<reg name="xmm10" bitsize="128" type="vec128" regnum="50"/>
<reg name="xmm11" bitsize="128" type="vec128" regnum="51"/>
<reg name="xmm12" bitsize="128" type="vec128" regnum="52"/>
<reg name="xmm13" bitsize="128" type="vec128" regnum="53"/>
<reg name="xmm14" bitsize="128" type="vec128" regnum="54"/>
<reg name="xmm15" bitsize="128" type="vec128" regnum="55"/>
<reg name="mxcsr" bitsize="32" type="i386_mxcsr" regnum="56" group="vector"/>
</feature>
<feature name="org.gnu.gdb.i386.linux">
<reg name="orig_rax" bitsize="64" type="int" regnum="57"/>
</feature>
<feature name="org.gnu.gdb.i386.segments">
<reg name="fs_base" bitsize="64" type="int" regnum="58"/>
<reg name="gs_base" bitsize="64" type="int" regnum="59"/>
</feature>
<feature name="org.gnu.gdb.i386.avx">
<reg name="ymm0h" bitsize="128" type="uint128" regnum="60"/>
<reg name="ymm1h" bitsize="128" type="uint128" regnum="61"/>
<reg name="ymm2h" bitsize="128" type="uint128" regnum="62"/>
<reg name="ymm3h" bitsize="128" type="uint128" regnum="63"/>
<reg name="ymm4h" bitsize="128" type="uint128" regnum="64"/>
<reg name="ymm5h" bitsize="128" type="uint128" regnum="65"/>
<reg name="ymm6h" bitsize="128" type="uint128" regnum="66"/>
<reg name="ymm7h" bitsize="128" type="uint128" regnum="67"/>
<reg name="ymm8h" bitsize="128" type="uint128" regnum="68"/>
<reg name="ymm9h" bitsize="128" type="uint128" regnum="69"/>
<reg name="ymm10h" bitsize="128" type="uint128" regnum="70"/>
<reg name="ymm11h" bitsize="128" type="uint128" regnum="71"/>
<reg name="ymm12h" bitsize="128" type="uint128" regnum="72"/>
<reg name="ymm13h" bitsize="128" type="uint128" regnum="73"/>
<reg name="ymm14h" bitsize="128" type="uint128" regnum="74"/>
<reg name="ymm15h" bitsize="128" type="uint128" regnum="75"/>
</feature>
</target>
#06"); [noack mode]
handling possible serial event
getpkt ("qXfer:auxv:read::0,1000");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_read_auxv()
putpkt ("$l!"); [noack mode]
handling possible serial event
getpkt ("QNonStop:0");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_start_non_stop()
[pid=9525] DEBUG(linux): linux_async()
linux_async (0), previous=0
[all-stop mode enabled]
putpkt ("$OK#9a"); [noack mode]
handling possible serial event
getpkt ("qTStatus");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
Returning trace status as 0, stop reason tnotrun
putpkt ("$T0;tnotrun:0;tframes:0;tcreated:0;tfree:50*!;tsize:50*!;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::#30"); [noack mode]
handling possible serial event
getpkt ("qTfV");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
Returning first trace state variable definition
putpkt ("$1:0:1:74726163655f74696d657374616d70#06"); [noack mode]
handling possible serial event
getpkt ("qTsV");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
Returning additional trace state variable definition
putpkt ("$l#6c"); [noack mode]
handling possible serial event
getpkt ("?");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_pause_all()
[pid=9525] DEBUG(linux): stop_all_lwps()
>>>> entering void stop_all_lwps(int, lwp_info*)
stop_all_lwps (stop, except=none)
[pid=9525] DEBUG(linux): send_sigstop()
[pid=9525] DEBUG(linux): wait_for_sigstop()
wait_for_sigstop: pulling events
[pid=9525] DEBUG(linux): linux_wait_for_event_filtered()
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
[pid=9525] DEBUG(linux): status_pending_p_callback()
[pid=9525] DEBUG(linux): check_zombie_leaders()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): num_lwps()
leader_pid=9529, leader_lp!=NULL=1, num_lwps=1, zombie=0
[pid=9525] DEBUG(linux): not_stopped_callback()
LLW: exit (no unwaited-for LWP)
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
stop_all_lwps done, setting stopping_threads back to !stopping
<<<< exiting void stop_all_lwps(int, lwp_info*)
[pid=9525] DEBUG(linux): linux_stabilize_threads()
[pid=9525] DEBUG(linux): stuck_in_jump_pad_callback()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
[pid=9525] DEBUG(linux): move_out_of_jump_pad_callback()
[pid=9525] DEBUG(linux): maybe_move_out_of_jump_pad()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
Checking whether LWP 9529 needs to move out of the jump pad...no
[pid=9525] DEBUG(linux): lwp_suspended_inc()
[pid=9525] DEBUG(linux): lwp_running()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): unsuspend_all_lwps()
[pid=9525] DEBUG(linux): lwp_suspended_decr()
[pid=9525] DEBUG(linux): stuck_in_jump_pad_callback()
[pid=9525] DEBUG(linux): supports_fast_tracepoints()
Writing resume reply for LWP 9529.9529:1
[pid=9525] DEBUG(linux): linux_fetch_registers()
[pid=9525] DEBUG(linux): regsets_fetch_inferior_registers()
[pid=9525] DEBUG(linux): regset_disabled()
[pid=9525] DEBUG(linux): regset_disabled()
[pid=9525] DEBUG(linux): linux_stopped_by_watchpoint()
[pid=9525] DEBUG(linux): linux_stopped_by_sw_breakpoint()
[pid=9525] DEBUG(linux): linux_stopped_by_hw_breakpoint()
putpkt ("$T0506:0*,;07:a0e5f*"7f0* ;10:801a40*';thread:p2539.2539;core:0;#ee"); [noack mode]
handling possible serial event
getpkt ("qXfer:threads:read::0,1000");  [no ack sent] 
putpkt ("$l<threads>
<thread id="p2539.2539" core="0" name="a.out"/>
</threads>
#f9"); [noack mode]
handling possible serial event
getpkt ("qAttached:2539");  [no ack sent] 
putpkt ("$0#30"); [noack mode]
handling possible serial event
getpkt ("qXfer:exec-file:read:2539:0,1000");  [no ack sent] 
putpkt ("$l/home/kamil/binutils-gdb/build/a.out#c9"); [noack mode]
handling possible serial event
getpkt
ack mode]
handling possible serial event
getpkt ("vFile:pread:5,47ff,b8930");  [no ack sent] 
putpkt ("$F880;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:5,47ff,40");  [no ack sent] 
putpkt ("$F4737;
"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:5,47ff,b87c7");  [no ack sent] 
putpkt ("$F9e9;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:5,47ff,200");  [no ack sent] 
putpkt ("$F4724;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:5");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:5,47ff,a62ec");  [no ack sent] 
putpkt ("$F47a7;,"); [noack
ack mode]
handling possible serial event
getpkt ("vFile:pread:6,47ff,b8930");  [no ack sent] 
putpkt ("$F880;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:6,47ff,40");  [no ack sent] 
putpkt ("$F4737;
"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:6,47ff,b87c7");  [no ack sent] 
putpkt ("$F9e9;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:6,47ff,200");  [no ack sent] 
putpkt ("$F4724;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:6,47ff,a62ec");  [no ack sent] 
putpkt ("$F47a7;,"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:6,47ff,200");  [no ack se
ack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:fstat:6");  [no ack sent] 
putpkt ("$F40;"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:5,47ff,79010");  [no ack sent] 
putpkt ("$F46ea;�ff.�"); [noack mode]
handling possible serial event
getpkt ("Hc-1");  [no ack sent] 
putpkt ("$E01#a6"); [noack mode]
handling possible serial event
getpkt ("qOffsets");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
putpkt ("$#00"); [noack mode]
handling possible serial event
getpkt ("qXfer:libraries-svr4:read::0,1000");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_qxfer_libraries_svr4()
[pid=9525] DEBUG(linux): elf_64_file_p()
[pid=9525] DEBUG(linux): elf_64_header_p()
[pid=9525] DEBUG(linux): get_r_debug()
[pid=9525] DEBUG(linux): get_dynamic()
[pid=9525] DEBUG(linux): get_phdr_phnum_from_proc_auxv()
[pid=9525] DEBUG(linux): linux_read_memory()
putpkt ("$E01#a6"); [noack mode]
handling possible serial event
getpkt ("qXfer:auxv:read::0,1000");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_read_auxv()
putpkt ("$l!"); [noack mode]
handling possible serial event
getpkt ("m400040,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"040*640*+40*'70040*(70040**10*)#8f"); [noack mode]
handling possible serial event
getpkt ("m400078,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"050*"0010*+1040*)1040*'61b4070*&61b4070*(10*)#80"); [noack mode]
handling possible serial event
getpkt ("m4000b0,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"040*"00d0070*(d0470*(d0470*&6737020*&6737020*(10*)#c2"); [noack mode]
handling possible serial event
getpkt ("m4000e8,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"060*"e0100a0*&e0204a0*&e0204a0*&f0510*(40690**10*)#67"); [noack mode]
handling possible serial event
getpkt ("m400120,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$040*"040*%20*+240**240*'440**440*+40**#dc"); [noack mode]
handling possible serial event
getpkt ("m400158,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$070*"040*"e0100a0*&e0204a0*&e0204a0*&20*+60*,80**#11"); [noack mode]
handling possible serial event
getpkt ("m400190,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$51e57464060*r10*+#bd"); [noack mode]
handling possible serial event
getpkt ("m4001c8,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$52e57464040*"e0100a0*&e0204a0*&e0204a0*&202f0*(202f0*)10**#83"); [noack mode]
handling possible serial event
getpkt ("m400040,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"040*640*+40*'70040*(70040**10*)#8f"); [noack mode]
handling possible serial event
getpkt ("m400078,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"050*"0010*+1040*)1040*'61b4070*&61b4070*(10*)#80"); [noack mode]
handling possible serial event
getpkt ("m4000b0,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"040*"00d0070*(d0470*(d0470*&6737020*&6737020*(10*)#c2"); [noack mode]
handling possible serial event
getpkt ("m4000e8,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"060*"e0100a0*&e0204a0*&e0204a0*&f0510*(40690**10*)#67"); [noack mode]
handling possible serial event
getpkt ("m400120,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$040*"040*%20*+240**240*'440**440*+40**#dc"); [noack mode]
handling possible serial event
getpkt ("m400158,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$070*"040*"e0100a0*&e0204a0*&e0204a0*&20*+60*,80**#11"); [noack mode]
handling possible serial event
getpkt ("m400190,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$51e57464060*r10*+#bd"); [noack mode]
handling possible serial event
getpkt ("m4001c8,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$52e57464040*"e0100a0*&e0204a0*&e0204a0*&202f0*(202f0*)10**#83"); [noack mode]
handling possible serial event
getpkt ("m400040,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"040*640*+40*'70040*(70040**10*)#8f"); [noack mode]
handling possible serial event
getpkt ("m400078,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"050*"0010*+1040*)1040*'61b4070*&61b4070*(10*)#80"); [noack mode]
handling possible serial event
getpkt ("m4000b0,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"040*"00d0070*(d0470*(d0470*&6737020*&6737020*(10*)#c2"); [noack mode]
handling possible serial event
getpkt ("m4000e8,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"060*"e0100a0*&e0204a0*&e0204a0*&f0510*(40690**10*)#67"); [noack mode]
handling possible serial event
getpkt ("m400120,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$040*"040*%20*+240**240*'440**440*+40**#dc"); [noack mode]
handling possible serial event
getpkt ("m400158,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$070*"040*"e0100a0*&e0204a0*&e0204a0*&20*+60*,80**#11"); [noack mode]
handling possible serial event
getpkt ("m400190,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$51e57464060*r10*+#bd"); [noack mode]
handling possible serial event
getpkt ("m4001c8,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$52e57464040*"e0100a0*&e0204a0*&e0204a0*&202f0*(202f0*)10**#83"); [noack mode]
handling possible serial event
getpkt ("m4a8828,8");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$0*,#86"); [noack mode]
handling possible serial event
getpkt ("m4a8820,4");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$0*"00#dc"); [noack mode]
handling possible serial event
getpkt ("vFile:setfs:0");  [no ack sent] 
putpkt ("$F0#76"); [noack mode]
handling possible serial event
getpkt ("vFile:open:2f70726f632f393532392f7461736b2f393532392f6d617073,0,1c0");  [no ack sent] 
putpkt ("$F7#7d"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:7,47ff,0");  [no ack sent] 
putpkt ("$F2f9;0040*!-00401000 r--p 0*"00 fe:00 538908 *9/home/kamil/binutils-gdb/build/a.out
00401000-0047d000 r-xp 0* 1000 fe:00 538908 *9/home/kamil/binutils-gdb/build/a.out
0047d000-004a1000 r--p 0007d000 fe:00 538908 *9/home/kamil/binutils-gdb/build/a.out
004a2000-004a8000 rw-p 000a1000 fe:00 538908 *9/home/kamil/binutils-gdb/build/a.out
004a8000-004a9000 rw-p 0*"00 00:00 0 *>[heap]
7f* 7ffa000-7f* 7ffd000 r--p 0*"00 00:00 0 *6[vvar]
7f* 7ffd000-7f* 7fff000 r-xp 0*"00 00:00 0 *6[vdso]
7f*"de000-7f*"ff000 rw-p 0*"00 00:00 0 *6[stack]
#63"); [noack mode]
handling possible serial event
getpkt ("vFile:pread:7,47ff,2f9");  [no ack sent] 
putpkt ("$F0;#b1"); [noack mode]
handling possible serial event
getpkt ("vFile:close:7");  [no ack sent] 
putpkt ("$F0#76"); [noack mode]
handling possible serial event
getpkt ("m4a8828,8");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$0*,#86"); [noack mode]
handling possible serial event
getpkt ("m400040,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"040*640*+40*'70040*(70040**10*)#8f"); [noack mode]
handling possible serial event
getpkt ("m400078,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"050*"0010*+1040*)1040*'61b4070*&61b4070*(10*)#80"); [noack mode]
handling possible serial event
getpkt ("m4000b0,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"040*"00d0070*(d0470*(d0470*&6737020*&6737020*(10*)#c2"); [noack mode]
handling possible serial event
getpkt ("m4000e8,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"060*"e0100a0*&e0204a0*&e0204a0*&f0510*(40690**10*)#67"); [noack mode]
handling possible serial event
getpkt ("m400120,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$040*"040*%20*+240**240*'440**440*+40**#dc"); [noack mode]
handling possible serial event
getpkt ("m400158,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$070*"040*"e0100a0*&e0204a0*&e0204a0*&20*+60*,80**#11"); [noack mode]
handling possible serial event
getpkt ("m400190,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$51e57464060*r10*+#bd"); [noack mode]
handling possible serial event
getpkt ("m4001c8,38");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$52e57464040*"e0100a0*&e0204a0*&e0204a0*&202f0*(202f0*)10**#83"); [noack mode]
handling possible serial event
getpkt ("m43edf0,1");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$c3#96"); [noack mode]
handling possible serial event
getpkt ("m479010,1");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$c3#96"); [noack mode]
handling possible serial event
getpkt ("m7ffff7ffd000,40");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$7f454c460201010*/3003e00010*"60090*(40*+b010*1400038000400400011001000#0e"); [noack mode]
handling possible serial event
getpkt ("m7ffff7ffd040,e0");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$010*"050*Reb0f0*(eb0f0**10**20*"040*"48030*(48030*(48030*(20010*(20010*)80*+40*"040*"a8070*(a8070*(a8070*(60*+60*,40**50e57464040*"08080*)8080*)8080*(3c0**3c0*+40**#aa"); [noack mode]
handling possible serial event
getpkt ("m7ffff7ffd000,2000");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$7f454c460201010*/3003e00010*"60090*(40*+b010*14000380004004000110010* 10*"050*Reb0f0*(eb0f0**10**20*"040*"48030*(48030*(48030*(20010*(20010*)80*+40*"040*"a8070*(a8070*(a8070*(60*+60*,40**50e57464040*"08080*)8080*)8080*(3c0**3c0*+40*+30*"0a0*"040*"030*"060*370*+90*"010*"050*+20*"080*+30*"010*"010*"060*"8134300146650081010*"050*"070*"7e55dd7100ca1bb0864b85e60d8e1e8294789e7c19a3436e8a2ac62626b062656d5887ff0*M80*"22000c00200a0*(21030*(160*"12000c00500d0*(a9010*(1d0*"22000c00500d0*(a9010*(2a0*"12000c0*!f0*(10*+310*"22000c0*!f0*(10*,10*"12000c00200a0*(21030*(540*"1100f1ff0*<360*"12000c00100f0*(2a0**3d0*"22000c00100f0*(2a0*,5f5f7664736f5f636c6f636b5f67657474696d65005f5f7664736f5f67657474696d656f66646179005f5f7664736f5f74696d65005f5f7664736f5f676574637075006c696e75782d7664736f2e736f2e31004c494e55585f322e360*"02000200020002000200020002000200020*+100010001000100a1bfee0d140*"1c0*"440*+10*"02000100f675ae03140**540*+e0**440**10*<40**20010*(f5feff6f0*"0060010*)50**98020*)60**a8010*)a0**5e0*+b0**180**fcf* 6f0*"0010030*(fdf* 6f0*%20**1e0*+20**f0f* 6f0*"00f6020*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*}0*660*"040**4c696e75780*"25130400060*"0f0*%10* 4c696e75780*"342e31392e302d352d616d6436340*!40*"140*"030*"474e55002c3f2dfc8030e3657c1653817468104f881e547e011b033b3c0*"060*"58010* 580*"e8010* 80*"018020* a80*"48050* ec0*"f8060* 20010*!8070* 38010*(140*+17a5200017810011b0c070890010* 240*"1c0*"f80*"8d0*"00410e108602500d0602670ac60c0708410b44c60c070800240*"440*"60010* 230*"00410e108602430d06590ac60c0708410b44c60c07080* 40*"06c0*"68010* 21030*"410e108602460d06478e038d048c058306025b0ac342cc42cd42ce41c60c0708410b02a80ac342cc42cd42ce41c60c0708410b30*"0b0*"054040* a9010*"410e108602430d06468e038d048c054c830602d10ac342cc42cd42ce41c60c0708410b140*"e40*"d0050* 10*31c0*"fc0*"c8050* 2a0*"00410e108602480d0660c60c07080* 558b1599d6f* 4c8d05afd6f* 4889e5eb510faee80f3148c1e2204809c24889d00fbe1593d6f* 482b0578d6f* 4989c189d1f7d949d3e989d148d3e085d2488b0d68d6f* 8b156ad6f* 490f48c148f7e2480facd0208b1540d6f* 39d6741589d683e6fe41f6000175a431c0c7070*"005dc34801c85d483905a4c6f* 480f43059cc6f* c30f1f00554889e50faee80f3148c1e2204809d0488b1581c6f* 4839c277025dc34889d05dc36* 2e0f1f840*&6690554189fb4889e541564155415453488d1d4bc6f* 4883e4f04883ec104c8d6c240c83ff010f841f010* 7e4483ff050f84ed0*"83ff060f85cb0*"8b03a8010f85e7010* 488b1560c6f* 488916488b155ec6f* 48895608390375dd488d65e0

F
 "); [noack mode]
handling possible serial event
getpkt ("qSymbol::");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
putpkt ("$qSymbol:6764625f6167656e745f6764625f74705f686561705f62756*!572#57"); [noack mode]
getpkt ("qSymbol::6764625f6167656e745f6764625f74705f686561705f627566666572");  [no ack sent] 
symbol `gdb_agent_gdb_tp_heap_buffer' not found
[pid=9525] DEBUG(linux): linux_look_up_symbols()
Trying host libthread_db library: libthread_db.so.1.
Host libthread_db.so.1 resolved to: /lib/x86_64-linux-gnu/libthread_db.so.1.
putpkt ("$qSymbol:6e70746c5f76657273696f6e#13"); [noack mode]
getpkt ("qSymbol::6e70746c5f76657273696f6e");  [no ack sent] 
td_ta_new(): application not linked with libthread
thread_db_load_search returning 0
putpkt ("$OK#9a"); [noack mode]
handling possible serial event
getpkt ("qTStatus");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
Returning trace status as 0, stop reason tnotrun
putpkt ("$T0;tnotrun:0;tframes:0;tcreated:0;tfree:50*!;tsize:50*!;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::#30"); [noack mode]
handling possible serial event
getpkt ("qTfP");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
Returning first tracepoint definition piece
putpkt ("$l#6c"); [noack mode]
handling possible serial event
getpkt ("qXfer:btrace-conf:read::0,1000");  [no ack sent] 
putpkt ("$E.Btrace not enabled.#4e"); [noack mode]
handling possible serial event
getpkt ("m479010,1");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessing_memory()
putpkt ("$c3#96"); [noack mode]
handling possible serial event
getpkt ("qSymbol::");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_supports_tracepoints()
putpkt ("$qSymbol:6764625f6167656e745f6764625f74705f686561705f62756*!572#57"); [noack mode]
getpkt ("qSymbol::6764625f6167656e745f6764625f74705f686561705f627566666572");  [no ack sent] 
symbol `gdb_agent_gdb_tp_heap_buffer' not found
[pid=9525] DEBUG(linux): linux_look_up_symbols()
Trying host libthread_db library: libthread_db.so.1.
Host libthread_db.so.1 resolved to: /lib/x86_64-linux-gnu/libthread_db.so.1.
putpkt ("$qSymbol:6e70746c5f76657273696f6e#13"); [noack mode]
getpkt ("qSymbol::6e70746c5f76657273696f6e");  [no ack sent] 
td_ta_new(): application not linked with libthread
thread_db_load_search returning 0
putpkt ("$OK#9a"); [noack mode]
handling possible serial event
getpkt ("qXfer:threads:read::0,1000");  [no ack sent] 
putpkt ("$l<threads>
<thread id="p2539.2539" core="0" name="a.out"/>
</threads>
#f9"); [noack mode]
handling possible serial event
getpkt ("m401a80,1");  [no ack sent] 
[pid=9525] DEBUG(linux): linux_prepare_to_access_memory()
[pid=9525] DEBUG(linux): linux_thread_alive()
[pid=9525] DEBUG(linux): find_lwp_pid()
[pid=9525] DEBUG(linux): lwp_is_marked_dead()
[pid=9525] DEBUG(linux): linux_thread_stopped()
[pid=9525] DEBUG(linux): linux_read_memory()
[pid=9525] DEBUG(linux): linux_done_accessi